# CEI 64-8 standard: application, evolution and new features \| Mela

Source: https://www.mela.work/en/blog/cei-64-8-standard-scope-evolution

Language: en

Discover when the Italian CEI 64-8 standard applies, how it has evolved and what it says about low-voltage electrical systems.

## STANDARD CEI 64-8: WHEN IT APPLIES, EVOLUTION OF THE STANDARD AND NEW FEATURES

This article provides a detailed analysis of the CEI 64-8 standard, the fundamental reference point for designing and installing electrical systems in domestic and commercial environments in Italy. Issued by the Italian Electrotechnical Committee (CEI), this standard establishes guidelines to ensure the safety and efficiency of low-voltage electrical systems.

Everything you need to know about the CEI 64 8 standard

Everything you need to know about the CEI 64 8 STANDARD



***Contents:***



## 1.Introduction: what is the CEI?



Before discussing the standard covered by this article, it is useful to understand what is meant by CEI.



The CEI is [*“the Italian Electrotechnical Committee, founded in 1909 with the mission of preparing regulatory documents and developing a range of regulatory and pre-regulatory activities at national and international level.”*](https://it.wikipedia.org/wiki/Comitato_elettrotecnico_italiano)



## 2.What is the CEI 64-8 Standard?



The CEI 64-8 standard is an essential document within the Italian regulatory framework for constructing electrical systems in civil environments. It provides comprehensive, detailed guidance for designing, installing and testing electrical systems in strict accordance with current legislation and standards. Its importance lies in its role as a crucial reference for electricians and everyone working in electrical installation.



It can almost be described as “the sacred text of electrical systems”. CEI 64-8 has a broad scope, covering all aspects of systems up to 1500V direct current and up to 1000V alternating current. Through its provisions, the standard primarily aims to ensure regulatory compliance and the safety of people who live or work in the environments where systems are installed.



The CEI 64-8 standard is the result of careful consideration and collaborative work between industry experts and regulatory institutions. It is based on compliance with Italian Law 186/68 and Italian Ministerial Decree 37/08, which explicitly require technical systems inside buildings to be designed and constructed with particular attention to safety.



Among its many objectives, the standard aims to define precisely the requirements needed to design and implement low-voltage electrical systems, ensuring that they comply with safety standards and industry best practice. It also provides clear, detailed guidance for every stage of the process, from initial design to installation and final testing.



In summary, CEI 64-8 is an indispensable tool for ensuring regulatory compliance and the safety of civil electrical systems, thereby helping to provide a safe and protected living and working environment for all users.



### 2.1\_When is a system defined as low voltage?



Let us clarify this fundamental concept. We have said that this standard contains requirements for the design, construction and testing of a low-voltage user electrical system.



But what is meant by a low-voltage user electrical system? Simply, one whose voltage does not exceed 1000V in alternating current or 1500V in direct current.



Now that this point is clear, let us look at how this standard is structured and what it specifically covers.



## 3.How is the CEI 64-8 Standard structured and what topics does it cover?



The structure listed below refers to the latest edition of the standard, namely the eighth edition.



In this latest edition, 8 parts are covered separately. Let us examine them in detail:



1. **Part 1:** Subject, purpose and fundamental principles
2. **Part 2:** Definitions
3. **Part 3:** General characteristics
4. **Part 4:** Safety requirements
5. **Part 5:** Selection and installation of electrical equipment
6. **Part 6:** Verification
7. **Part 7:** Special locations and applications
8. **Part 8:** Energy efficiency of electrical systems



For greater clarity and understanding, we have created the graphic below:

CEI standard structure diagram, drawing sheet 1

## 4.When does CEI 64-8 apply?

When the CEI 64 8 standard applies

## 



Correct application of the CEI 64-8 standard is essential for ensuring the safety and efficiency of electrical systems in a wide range of contexts. Let us examine when and where CEI 64-8 applies, carefully considering the different categories of electrical systems.



**The standard applies to user electrical systems in:**



- *a) Residential buildings;*


- *b) Buildings and structures intended for commercial use;*


- *c) Buildings and structures intended to receive the public;*


- *d) Buildings and structures intended for industrial use;*


- *e) Buildings and structures intended for agricultural and livestock use;*


- *f) Caravans, campsites and similar locations;*


- *g) Construction sites, exhibitions, fairs and other temporary structures;*


- *h) Marinas;*


- *i) Outdoor lighting connected in parallel;*


- *l) Medical locations;*


- *m) Mobile or transportable units;*


- *n) Extra-low-voltage lighting systems;*


- *o) Electric vehicle charging;*


- *p) Service and maintenance access routes;*


- *q) Floor and wall heating systems.*



\_
Source: [https://www.lavoripubblici.it/news/progettazione-impianti-elettrici-revisione-norma-cei-64-8-32340](https://www.lavoripubblici.it/news/progettazione-impianti-elettrici-revisione-norma-cei-64-8-32340)\_



## 5.When does CEI 64-8 not apply?



It is important to understand that the CEI 64-8 standard does not apply universally to every context and situation involving electrical systems. Let us look at the cases where CEI 64-8 does not apply, clarifying which types of systems and equipment are excluded.



***The standard does not apply to:***



*a) Electric traction equipment;*



*b) Electrical equipment in motor vehicles;*



*c) Electrical equipment on board ships;*



*d) Electrical equipment in aircraft;*



*e) Outdoor public-lighting electrical systems supplied in series;*



*f) Electrical systems in mines;*



*g) Radio-interference suppression devices, except with regard to system safety;*



*h) Electric fences;*



*i) Power generation and transmission systems;*



*j) Protection of buildings against lightning.*



\_
Source: [https://www.lavoripubblici.it/news/progettazione-impianti-elettrici-revisione-norma-cei-64-8-32340](https://www.lavoripubblici.it/news/progettazione-impianti-elettrici-revisione-norma-cei-64-8-32340)\_



## 6.Evolution of the CEI 64-8 Standard: from 1984 to the present day



The CEI 64-8 standard has undergone significant evolution over the years, adapting to technological and regulatory changes and users’ needs. This section explores the evolution of the standard in detail, from its origins to its most recent editions.



Let us look at them together:



- **Edition 1: 1984**


- **Edition 2: 1987**


- **Edition 3: 92**


- **Edition 4: 98**


- **Edition 5: 2003**


- **Edition 6: 2007**


- **Edition 7: 2012**


- **Edition 8: 2021**



### 



***6.1 UPDATES TO THE SEVENTH VERSION***



**-Version 1 (2012)**



**-Version 2 (2015):** update with a new section for medical-use systems and an update concerning auxiliary circuits and systems for public-use venues such as exhibitions, events, concerts and fairs.



**-Version 3 (2017):** This introduced an important update that still applies in version 8, namely a new classification divided into 3 levels, as follows:



- “*Level 1*, which sets the basic rules and minimum standards for systems according to the floor area in square metres of the flat.


- *Level 2*, which includes systems such as video surveillance, burglar alarms and video intercoms. This level has the same number of light points as the first level, with the addition of a load-management system which, if the maximum threshold is exceeded, disconnects the excess load.


- *Level 3*: at this level, at least 4 home automation systems must be present, used together with intrusion detection and video surveillance, climate and temperature control, lighting, sound distribution, load management, irrigation, shutter automation, and gas, smoke and fire detectors.”



*Source: [https://campoelettrico.it/blog/p-cei-64-8-norma-normativa](https://campoelettrico.it/blog/p-cei-64-8-norma-normativa)*



**-Version 4 (2017):** a new variant was introduced concerning the choice of cables to be used in homes (correct electrical-cable sizing and suitable current-carrying capacity).



**-Version 5 (2019)**



This version covers protection against surges caused by atmospheric events, surge protection and electric-vehicle charging.



### 



**6.2 UPDATES IN THE EIGHTH VERSION**



In this new version, which came into force 9 years after its previous version 7, in 2021, the following changes were introduced in particular:



1. *Chapter 37 on levels of residential electrical systems was amended.*
2. *Table 51 was added concerning the classification of external influences.*
3. *Part 6 of the volume was updated regarding the checks to be carried out on user electrical systems.*
4. *Part 8-1, concerning the energy efficiency of systems, was amended.*
5. *New Part 8-2 was added concerning producers and consumers (low-voltage active users).*
6. *A sheet concerning application of the CPR regulation to electrical cables was added.*
7. *The fire-prevention code was added.*



## 7.New features in the CEI 64-8 Standard: the ninth edition



A further amendment to this standard is currently under way. We are referring to the ninth edition of CEI 64-8, which will introduce important new features, particularly concerning the following topics:



- **PART FOUR**, concerning safety requirements


- **PART FIVE**, concerning the selection and installation of electrical equipment


- **PART SEVEN**, concerning special locations and applications



*We will examine the changes introduced by this new edition in detail in a future article.*



## 8.Conclusions



​​In conclusion, having explored the importance and scope of application of the CEI 64-8 standard, it is clear that maintaining high standards of safety and regulatory compliance in electrical systems is essential to protect people and structures. However, managing work and projects can be complex and time-consuming, requiring significant resources.



This is where Mela, our innovative app for electricians, comes in. [***With Mela***](/en), we simplify and optimise every stage of an electrician’s work. With the ability to create detailed service reports, store photos in the cloud, monitor costs, plan activities with an integrated calendar and much more, ***Mela provides an effective solution for managing and monitoring projects efficiently.***



You can also manage everything within a chat, allowing you to coordinate work on site easily and facilitating communication and collaboration among team members. Mela is therefore a valuable tool for improving productivity and reducing the time and costs associated with managing electrical systems.

MELA app for electricians

We invite you to [***try Mela for free***](https://app.mela.work/auth) and discover for yourself how this app can transform the way you work, making your activities more efficient and profitable. [***Find out more on our website***](/en) and start optimising your work with Mela today\!

## Article video

## HERE ARE MORE CONTENT PIECES YOU MAY FIND INTERESTING:



- [***App for electricians: service reports, delivery notes and cost control***](/en/solutions/installation-contractors)


- [***App for electricians: let us look at the 3 key aspects***](/en/blog/electrician-apps-three-key-features)


- [***Construction-site management app***](https://www.edilsocialnetwork.it/aziendeprodotti/306-melaworks)



## QUESTIONS AND ANSWERS:



## What features does the Mela app offer electricians and systems installers?



The Mela app offers a wide range of features, including the ability to create service reports, store photos in the cloud, monitor costs, plan activities with an integrated calendar and manage the site using an integrated chat.



## What benefits does using the Mela app offer electricians and systems installers?



Using the Mela app enables electricians and systems installers to optimise their work, improve productivity and reduce the time and costs associated with managing electrical systems. It also facilitates communication and collaboration among team members.



## What testimonials are available from professionals who have used the Mela app?



Professionals who have used the Mela app have reported a considerable increase in operational efficiency and a reduction in project management costs. Testimonials available on Mela’s website provide further details about users’ positive experiences.



## How can I try Mela immediately?



Trying Mela is simple and accessible to all electricians and systems installers who want to improve project management. You can start immediately by downloading the free version of the Mela app, which supports the management of up to 3 sites at no cost. [***Simply register on our website or download our app***](https://app.mela.work/auth). Once installed, you can explore all Mela’s features and assess how it can improve your productivity and reduce your project management costs. Try Mela for free today and discover the value it can add to your daily work\!



*Article sources:*



- [https://nt24.it/2023/10/in-arrivo-la-nona-edizione-della-norma-cei-64-8/](https://nt24.it/2023/10/in-arrivo-la-nona-edizione-della-norma-cei-64-8/)


- [https://certifico.com/normazione/210-documenti-riservati-normazione/organismi-normazione/documenti-cei/20707-cei-64-8-ed-9-in-inchiesta-pubblica](https://certifico.com/normazione/210-documenti-riservati-normazione/organismi-normazione/documenti-cei/20707-cei-64-8-ed-9-in-inchiesta-pubblica)


- [https://it.wikipedia.org/wiki/Comitato\_elettrotecnico\_italiano](https://it.wikipedia.org/wiki/Comitato_elettrotecnico_italiano)


- [https://it.wikipedia.org/wiki/...](https://it.wikipedia.org/wiki/Comitato_elettrotecnico_italiano)


- [https://www.lavoripubblici.it/...](https://www.lavoripubblici.it/news/progettazione-impianti-elettrici-revisione-norma-cei-64-8-32340)


- [https://campoelettrico.it/blog...](https://campoelettrico.it/blog/p-cei-64-8-norma-normativa)
