# APE at the end of building works: what to know \| Mela

Source: https://www.mela.work/en/blog/italian-ape-energy-certificate-end-of-works

Language: en

Learn what the APE is, which information it must contain, who can issue it and how to manage the certificate during building works.

## Obligation to provide an APE at the end of works: everything you need to know

Let’s find out what the APE, or Energy Performance Certificate, is. We’ll look at the characteristics it must have and the information it must contain. The APE, or Energy Performance Certificate, is drawn up at the end of works. It is the official document describing the energy characteristics of a building or individual property unit. It is used to define the energy consumption required by the property for heating in winter, cooling in summer, producing domestic hot water and operating the lighting system; it assigns an energy class ranging from A4 – the most efficient – to G, the least efficient. It is a valuable tool for anyone wishing to rent or buy a property and is a legal requirement at various stages in a building’s life cycle, including completion of the works. Let’s now look in detail at what the APE is.

Worker installing a system on the roof of a building

Worker installing a system on the roof of a building



## What are the differences between Class A and Class G?



As mentioned, the Energy Performance Certificate is an official document describing a building’s energy characteristics, and it can provide a concrete estimate of how much energy it consumes each year to ensure indoor comfort and the wellbeing of the people living there.



Let’s explain this more clearly: a Class A4 building is highly insulated, equipped with efficient systems such as heat pumps and photovoltaic panels, and uses renewable sources. A Class G building, by contrast, is generally poorly insulated, uses outdated systems and creates significant energy waste.



Let’s look at some figures to understand this better, referring to a home of 100 square metres:



- a Class A4 property may consume less than 30 kWh/m² per year, for a total of approximately 3.000 kWh/year


- a Class G property may exceed 200 kWh/m² per year, reaching more than 20.000 kWh/year; this is a consumption 6 times higher



To give an idea of the cost, we could say that, with the same tariffs, a Class G home can cost up to 3000 euros more than a Class A4 home.



### What are the benefits of an efficient home?



But it is not just about costs; let’s look in detail at what a Class A home can offer:



- greater thermal comfort, resulting in milder temperatures in winter and cooler temperatures in summer


- better air quality thanks to controlled mechanical ventilation


- a lower environmental impact due to reduced CO2 emissions


- higher value, because the property is more attractive on the market



This is why it is essential not to regard the APE as merely a bureaucratic requirement, but as a fundamental tool on which to base informed decisions about property assets.



### A practical example: a 100-square-metre flat in Class A4



Now let’s imagine a newly built flat of 100 square metres, classified as Class A4. In this category, the APE must certify annual consumption below 30 kWh/m² per year. This figure is included in the document with a clear indication of the overall energy performance, divided into energy from renewable and non-renewable sources.



The APE will also highlight the technologies installed and used, such as a photovoltaic system, a high-efficiency heat pump or low-emissivity triple glazing. The section on recommended improvements may be left blank.



The certificate will also include a colour graphic representation, which is easy to understand even for people without specific technical knowledge.



## Which laws govern the APE?

Excavator and workers at work

The APE is required under Italian legislation implementing European directives on energy efficiency.



The main reference is [Legislative Decree (D.Lgs.) 192/2005](https://www.gazzettaufficiale.it/eli/id/2005/09/23/005G0219/sg), which has been updated over time to comply with new EU standards. [Presidential Decree (D.P.R.) 75/2013](https://www.gazzettaufficiale.it/eli/id/2013/06/27/13G00115/sg) establishes who may draw up the certificate, while the Ministerial Decree of 26 June 2015, also known as the Minimum Requirements Decree (Decreto Requisiti Minimi), introduced stricter obligations and specifies when the APE is required: new builds, demolition and reconstruction, major renovations or works that alter a building’s energy performance.



## What characteristics must it have?



There is a national standard format specifying the characteristics the APE must have to be considered valid. It therefore refers to objective technical assessments based on surveys, design documentation and, where necessary, site inspections.



It must include precise information on overall energy performance, including primary energy consumption, distinguishing between energy from renewable and non-renewable sources. Finally, it must contain recommendations for improvements: practical suggestions for making the building more energy efficient in terms of sustainability and financial savings.



### What information must it contain?



The APE must contain a range of technical information. Let’s look at it together:



- identifying details of the building or unit, such as its location and intended use


- the thermophysical characteristics of the building envelope, including walls, windows and doors, roof and floors


- system performance, with reference to heating, cooling and ventilation


- annual energy consumption, broken down by energy use


- the overall energy performance index


- the final energy class


- any recommended measures to improve performance



All data must be presented clearly and completely, in accordance with regulatory criteria and in an easily accessible way.



## Who must draw up the APE?



The APE must be drawn up by an authorised energy assessor: a professional registered with a professional body – architect, engineer, surveyor or technical expert – who has specific training.



This person must work independently and must not have been involved in the design or project management of the same property for which they are preparing the certification. In many cases, the APE is coordinated by the project manager or general contractor, but it remains essential that it is carried out by an authorised professional.



### What happens if the APE is not drawn up?



Failure to draw up the APE can result in severe penalties.



The client may receive a fine of between 1000 and 18000 euros. The project manager may be penalised if they fail to verify that the certificate has been issued before the declaration of completion of the works.



The absence of this document may also block land registry procedures, sales and access to tax bonuses.



## The role of the digital site diary in managing the APE



Timeliness, accurate documentation and coordination between the various professionals involved are essential for preparing and submitting the APE.



Choosing to use the features of a site app such as [Mela](/en) can help transform a complex obligation into a smooth, structured process.



Thanks to its features, Mela allows users to create, organise and manage documents defining the various stages of a construction site, track progress on works affecting energy performance and attach the necessary photographic or technical [documentation](/en/blog/mandatory-construction-site-documents-italy).



It helps centralise communications between the contractor, project manager and certifying technician, and allows the certificate to be stored securely alongside the site documentation.



These functions help increase operational efficiency and reduce the risk of formal errors, oversights or penalties, improving day-to-day operations.



## Conclusions



As we have seen, the APE is an integral part of the life cycle of every building project. Organising and managing it with [effective, modern tools](/en) allows a regulatory obligation to become a valuable asset for both the business and the client.
