# When Is an Electrical Design Mandatory? \| Mela

Source: https://www.mela.work/en/blog/mandatory-electrical-system-design-electrician-guide

Language: en

Discover when an electrical installation design is mandatory in Italy, who can sign it and how electricians can manage site work with Mela.

## When Is an Electrical Installation Design Mandatory? Everything an Electrician Needs to Know

The requirement for a design for electrical installations is highly important for electricians and industry technicians. Since 1990, regulations have undergone significant changes, directly affecting how installations must be designed and built. This article explores the main stages of the regulations, examining when a design is necessary and to what extent an electrician can intervene without the signature of an authorised designer.

Requirement for electrical installation designs under Ministerial Decree 37 2008

Requirement for electrical installation designs under Ministerial Decree 37 2008



***Contents:***



- *Law 186/1968*


- *Law 46/90 and Presidential Decree 447/1991*


- *Ministerial Decree 37/08*



## [](https://www.bosettiegatti.eu/info/norme/statali/1991_0447.htm)1.Introduction



In the electrical sector, correctly designing installations is essential to ensure safety and compliance with the Italian regulations in force. The question of when a design is required and who must prepare and sign it is therefore fundamental for electricians who need to work in compliance with the law. In this article, we provide a detailed guide based on the most authoritative regulations, including the [***CEI 0-2 guide***](https://www.certifico.com/impianti/documenti-impianti/337-documenti-impianti-riservati/6904-cei-0-2-guida-documentazione-progetto-impianti-elettrici), which guides and defines the design documentation for electrical installations.



## 2. Development of the regulations leading to the requirement for electrical installation designs



- **[Law 186/1968](https://www.gazzettaufficiale.it/eli/id/1968/03/23/068U0186/sg)**



Before 1990, the legislation in force was Law 186/1968, which established that installations had to be built to a professional standard, following CEI standards, as follows [“All materials, equipment, machinery, installations and electrical and electronic systems must be made and built to a professional standard.” and “Materials, equipment, machinery, installations and electrical and electronic systems made according to the standards of the Italian Electrotechnical Committee (CEI) are considered to have been built to a professional standard.”](https://mpsverifiche.it/storia-della-legislazione-impianti-elettrici/)



- **[Law 46/90](https://it.wikipedia.org/wiki/Legge_5_marzo_1990,_n._46#:~:text=La%20legge%205%20marzo%201990,e%20l'utilizzazione%20di%20gas.) and [Presidential Decree 447/1991](https://www.bosettiegatti.eu/info/norme/statali/1991_0447.htm)**



Law 46/90, in force from 13 March 1990 to 26 March 2008, was the first law to establish the requirement for technical and professional qualifications for people working on electrical installations; [“before this, anyone, even without specific experience, could start working as an installer or maintenance technician for installations.”](https://it.wikipedia.org/wiki/Legge_5_marzo_1990,_n._46#:~:text=Per%20la%20prima%20volta%20questa,o%20di%20manutentore%20di%20impianti.) Among other things, this law regulated the safety of electrical, radio and television, plumbing and water systems, transport systems and the use of gas.



Law 46/90 established the requirement for a design for the installation, alteration and extension of systems, exclusively assigned to professionals registered with the relevant professional registers.



Presidential Decree 447/1991 strengthened these provisions by regulating the implementation of Law no. 46 of 1990 on the safety of installations.



Between 1990 and 2008, various laws and decrees followed concerning extensions to the deadlines for compliance with Law 46/1990, as follows:



- [***Presidential Decree no. 392/1994***](https://www.normattiva.it/uri-res/N2Ls?urn:nir:presidente.repubblica:decreto:1994-04-18;392) - Compliance declared by means of a Declaration in lieu of an affidavit


- [***Law no. 25/1996***](https://www.normattiva.it/uri-res/N2Ls?urn:nir:stato:legge:1996-01-05;25) - Extension of the deadline for compliance with Law no. 46/1990


- [***Law no. 266/1997***](https://www.normattiva.it/uri-res/N2Ls?urn:nir:stato:legge:1997-08-07;266!vig=) - Extension of the deadline for compliance with Law no. 46/1990 - Final extension



This led to 2008 and Ministerial Decree no. 37/2008, known as the Installations Decree, under which an electrical installation design became ALWAYS mandatory.



Let us look at it in detail:



[***Ministerial Decree 37/08***](https://www.bosettiegatti.eu/info/norme/statali/2008_0037.htm)



Ministerial Decree 37/08, which came into force on 27 March 2008, repealed Law 46/90, making an electrical installation design mandatory for all installations.



Ministerial Decree 37/08 [requires a design to be prepared in all cases involving the installation, extension and alteration of both domestic and industrial systems, throughout the design, installation, alteration and maintenance stages.](https://www.sdproget.it/news/quando-e-obbligatorio-il-progetto-per-l-impianto-elettrico/#:~:text=Con%20l'introduzione%20del%20Decreto,ampliamento%20e%20trasformazione%20degli%20impianti.)



However, a distinction must be made: it is necessary to understand when an electrical installation design may be prepared by an electrician and when it must necessarily be prepared by a professional registered with the relevant professional register.

Development of the regulations leading to the requirement for electrical installation designs

## 3. Who Can Sign and Prepare the Electrical Installation Design?



​​As stated in Article 5 of Ministerial Decree 37/2008, in some cases the design may be signed by the technical manager of the installation company, while in others it must be signed by a professional registered with the relevant professional registers.



But what are these specific cases, and what are the limits of the installation company's technical manager?



Generally speaking, according to [***Ministerial Decree 37/08,***](https://www.bosettiegatti.eu/info/norme/statali/2008_0037.htm) the **authorised designer** is the only person who can sign designs for large or complex installations where particular safety requirements apply. For smaller or less complex installations, the owner of the installation company (the **electrician**) may sign the design. This applies especially to routine maintenance work or small extensions to existing installations.



More specifically, the types of installation for which the design must be prepared and signed by a professional registered with the relevant professional register are clearly set out in [Article 5 of Ministerial Decree 37/08.](https://www.bosettiegatti.eu/info/norme/statali/2008_0037.htm)



## 4. When Is a Design by a Professional Registered with the Relevant Professional Registers Mandatory?



As mentioned above, this is governed by [***Article 5 of Ministerial Decree 37/08,***](https://www.bosettiegatti.eu/info/norme/statali/2008_0037.htm) as follows:



**a)** Systems for the production, transformation, transmission, distribution and use of electrical energy; lightning protection systems; and systems for the automation of doors, gates and barriers. Domestic-use systems for all condominium utilities and for domestic utilities serving individual housing units with contracted power above 6 kW, or individual housing units with a floor area above 400 m²;



**b)** Electrical systems made with cold-cathode fluorescent lamps connected to electrical systems for which a design is mandatory, and in all cases systems with a total power greater than 1200 VA supplied by the ballasts;



**c)** Systems in properties used for production, commercial, service-sector and other activities, where utilities are supplied at a voltage above 1000 V, including the low-voltage section, or where low-voltage utilities have contracted power above 6 kW or the floor area exceeds 200 m²;



**d)** Electrical systems in property units containing, even only partially, areas subject to specific CEI regulations, including premises for medical use or premises where there is a risk of explosion or a higher fire risk, as well as lightning protection systems in buildings with a volume greater than 200 m³;



**e)** Radio and television systems, aerials, electronic systems for managing and distributing TV, telephone and data signals, including security systems and fibre-optic systems, as well as the infrastructure required to house these systems; electronic systems in general when they coexist with electrical systems for which design is mandatory;



**f)** Heating, climate-control, air-conditioning and refrigeration systems of any kind, including works for evacuating combustion products and condensate, and for ventilating and aerating premises; systems fitted with branched communal flues, and air-conditioning systems for all uses with a cooling capacity equal to or greater than 40.000 frigories/hour;



**g)** Systems for distributing and using gas of any type, including works for evacuating combustion products and ventilating and aerating premises; systems for distributing and using combustible gases with a thermal flow rate above 50 kW or fitted with branched communal flues, or systems for distributing medical gases for hospital use and similar purposes, including storage;



**h)** Water and sanitary systems of any kind;



**i)** Fire-protection systems. Systems installed in an activity subject to the issue of a fire-prevention certificate and, in any event, where there are 4 or more hydrants or 10 or more detection devices.



**l)** Lifting systems for people or goods using lifts, goods lifts, escalators and similar equipment;



[For all other work not falling within the categories of installation listed, the design may also be prepared by the **technical manager of the installation company**.](https://biblus.acca.it/obbligo-progetto-impianto-elettrico/)



## 5. Conclusion



Understanding when a design for an electrical installation is mandatory and who can sign it is essential to work in compliance with the regulations and ensure installation safety. Faced with the complexity of the regulations, my advice is to adopt innovative tools that can help electricians and other installation-sector professionals significantly improve their work efficiency, while ensuring regulatory compliance and optimal site management.



**Reference Regulations**



- ***Law 46/90***


- ***Presidential Decree 447/1991***


- ***Ministerial Decree 37/08***


- ***CEI Guide 0-2***



These regulatory references and guidelines help ensure that work is carried out in compliance with the laws in force and with the highest possible level of safety.



## 6. Optimising Work for Effective Site Management with Mela



For electricians and industry technicians, operational efficiency is essential. This is where [***Mela***](/en), a site-digitisation app, comes in, with the potential to revolutionise how work is managed.



**What is Mela?**



Mela is an innovative application that lets you monitor work and control site costs directly from your smartphone. With [***Mela***](/en), you can manage the site by taking photos, completing work reports, tracking site inspections and creating the site diary with just a few simple clicks.



**Mela: Efficiency in the Palm of Your Hand**



With Mela, you can manage everything you do on site from your smartphone, saving time and avoiding mistakes. Communicating via chat removes the need for paper or unnecessary computers on site. The result? Higher profits, accurate work and satisfied customers.



If you want to understand better how Mela can help you, I invite you to watch this interview with one of our customers, Ilir Berisha of Domotec Srl, recorded a few days ago. The company has operated in the installations sector for more than 10 years and specialises in creating technological systems, including climate-control and heating systems, photovoltaic panels, electrical installations and maintenance.



Ilir explains how he organised the exchange of information between the office and the site using the Mela app, which enables him to manage accounts, stock, reports and documents easily.

## Article video

Start [***trying the Mela app for free***](https://app.mela.work/signup) now\!



## FAQ on the Requirement for Electrical Installation Designs



## 1. When is a design for an electrical installation mandatory?



A design for an electrical installation is mandatory in several specific cases, as established by Ministerial Decree 37/08. For example, for residential installations, it is required when the dwelling's floor area exceeds 400 m² or the installed power exceeds 6 kW. It is also mandatory for installations in public buildings, healthcare facilities and construction sites, and where particular risks such as explosive atmospheres are present.



## 2. Who can sign the design for an electrical installation?



The design may be signed by an authorised designer, such as an engineer registered with the relevant professional register. In some less complex cases, such as routine maintenance or small extensions, an authorised electrician may also sign the design, provided that the regulations in force are complied with.



## 4. How can an electrician improve work efficiency?



Through innovative digital systems for the construction-site sector, such as Mela, an electrician can manage work more efficiently directly from a smartphone. With Mela, electricians can create and manage the site diary, complete work reports, track site inspections, share information in real time with field and office staff, and control site costs. The app helps save time, avoid mistakes and improve communication, thereby increasing productivity and customer satisfaction.



**Sources:**



- [*Biblius ACCA*](https://biblus.acca.it/obbligo-progetto-impianto-elettrico/)


- [*Sdproget*](https://www.sdproget.it/news/quando-e-obbligatorio-il-progetto-per-l-impianto-elettrico/#:~:text=Con%20l'introduzione%20del%20Decreto,ampliamento%20e%20trasformazione%20degli%20impianti)


- [*Bosettiegatti*](https://www.bosettiegatti.eu/info/norme/statali/2008_0037.htm)


- [*Wikipedia*](https://it.wikipedia.org/wiki/Legge_5_marzo_1990,_n._46#:~:text=Per%20la%20prima%20volta%20questa,o%20di%20manutentore%20di%20impianti)


- [*Mpsverifiche*](https://mpsverifiche.it/storia-della-legislazione-impianti-elettrici/)


- [*Normattiva*](https://www.normattiva.it/)
