New 2023 Public Contracts Code: Summary and Key Changes in Minutes
A practical overview of Italy’s 2023 Public Contracts Code: structure, key changes, digitalisation, procedures and the transition from the previous code.
Over the past year, Legislative Decree 31 March 2023, number 36 (Dgls 36/23) was published, establishing the new Public Contracts Code and replacing the previous Legislative Decree of 18 April 2016, number 50. This article aims to help you understand the contents of the new code and provide greater clarity on the subject. You will find a quick overview of the code’s structure, its new features and the key differences compared with its predecessor. At the end of the article, you will find the official, complete text of the new Public Contracts Code 2023.
Contents and key changes of the new Public Contracts Code 2023 Legislative Decree 36 23
Contents:
Entry into force of the New Public Contracts Code 2023
Italy’s new Public Contracts Code entered into force on 1 April 2023, while its provisions and annexes became fully applicable from 1 July 2023.
However, a significant transition point will occur only from 1 January 2024. Until that date, there will be a hybrid transitional period in which the old and new Public Contracts Codes will continue to coexist.
Legislative Decree no. 36/2023, new Public Contracts Code: the measures adopted are all in force from 1 July 2023, but some will become effective from 1 January 2024
What are the contents of the new Public Contracts Code 2023 in brief
This section answers the most frequently asked questions about the new Public Contracts Code. More specifically, it identifies the key topics and examines the changes introduced by it.
The new Public Contracts Code consists of 229 articles, an increase compared with the 220 articles in the old code.
The structure is divided into 5 main books:
- Book One contains the general principles and provisions concerning the digitalisation, planning and design of public contracts.
- Book Two concerns works, services and supplies contracts. It contains information on the parties involved, particularly contracting authorities on one side and economic operators on the other.
- Book Three concerns contracts in special sectors.
- Book Four is devoted to public-private partnerships and concessions.
- Book Five, lastly, concerns litigation management and ANAC, and contains final and transitional provisions.
There are also numerous annexes, in addition to 30, divided among each of the 5 books into which the code is organised.
The topics covered in the annexes to the new Public Contracts Code include in particular:
- RUP activities
- Planning works and services using templates, such as design verification
- Criteria for preparing regional price lists
- Qualification of contracting authorities and central purchasing bodies
- Works management and execution activities
- Testing and conformity verification
BOOK ONE: general principles and digitalisation
Book One of the new Public Contracts Code, comprising articles 1 to 47, is divided into four main parts:
Part One, Book 1_New Public Contracts Code:
Part One is itself divided into two titles:
- TITLE I: Contains the general principles;
- TITLE II: Concerns the scope of application, namely the cases in which the code applies, the role of the sole project manager (RUP) and the stages of contract awards.
Title I:
The principles include in particular:
- The principle of the result under Article 1: contracting authorities must ensure that contracts are awarded and performed promptly and with the best quality-price ratio, while always respecting the principles of legality, transparency and competition. In other words, every situation must have a public-interest objective that is to be achieved. The work of public administration is no longer linked solely to compliance with existing laws, but also to achieving objectives within optimum timeframes and with the least possible use of resources;
- The principle of trust: trust between contracting authorities and economic operators must be guaranteed;
- The principle of access to the market: contracting authorities must promote economic operators’ access to the market, particularly small and medium-sized enterprises (SMEs), for example by dividing contracts into lots;
- The principle of good faith: contracting authorities and economic operators must both act in good faith;
- The principles of solidarity and horizontal subsidiarity;
- The principle of administrative self-organisation: public administrations (PAs) must independently organise the performance of works and the provision of goods or services;
- The principle of contractual autonomy;
- The principle of preservation;
- The principle of contractual equilibrium;
- The principles that grounds for exclusion must be exhaustive and that participation should be maximised;
- The principle of applying national collective agreements.
Title II:
The second title addresses the code’s scope of application, European thresholds, and the sole project manager, known as the RUP, who as a new feature changes name compared with the old code, where the role was referred to as the sole procedure manager.
This person must oversee the various contract stages: planning, design, award and execution. Among the RUP’s requirements, in the case of works and engineering and architectural services contracts, the person must be a professional qualified to practise.
As regards the RUP’s duties, this person must coordinate the various processes required to deliver the public project within the specified timeframes and allocated costs, while also ensuring quality levels. The RUP’s activities during the award stage are also specified, such as checking administrative documents and tenders, as well as activities during execution, including assisting with the works and oversight together with the works director.
Lastly, at the end of Title II, the contract award stages are described.
Part Two, Book 1_New Public Contracts Code:
Part Two of Book One is devoted to the digitalisation of public contracts, which contracting authorities must ensure in compliance with the provisions of the Digital Administration Code (Codice dell'amministrazione digitale, CAD), referred to in Legislative Decree 82/2005.
Compared with the old contracts code, digitalisation is emphasised here, requiring contracting authorities to use digital tools to manage every stage of the tender process, including BIM technologies.
In particular, the following are provided for:
-a national public contracts database
-the virtual file of economic operators (FVOE)
-digital procurement platforms
-general automated procedures
Under Legislative Decree 30/03/2013 (the decree on transparency and civic access), transparency of information concerning public contracts must also be ensured.
ANAC (National Anti-Corruption Authority) is designated as the manager of the national public contracts database, where a digital file must also be created for each economic operator. Contracting authorities must also use digital platforms and dynamic purchasing systems to procure works, services and supplies, including MEPA (Electronic Marketplace of the Public Administration), which is mandatory above certain thresholds.
Part Three, Book 1_New Public Contracts Code:
Part Three of Book One concerns the planning of works and the purchase of goods and services. For works, a three-year public works programme must be prepared, including a list of the projects to be started during the year and specifying their source of funding.
A change compared with the old code is the three-year programme for goods and services, which under the old code covered two years.
Part Four, Book 1_New Public Contracts Code:
Part Four of Book One concerns the design of works, services and supplies. For works, the new feature is that there are only two design levels: the technical and economic feasibility project and the executive design. The definitive design has therefore been removed compared with the old code.
For services and supplies design, a single level is still provided for. A works project must also be validated before the works are awarded and performed. Validation is carried out by the RUP if that person did not take part in the design itself.
Another new feature of the new Public Contracts Code compared with its predecessor is the possibility of an integrated contract, namely a contract covering both the design and execution of the project.
Further changes introduced by the New Public Contracts Code
Other changes introduced by the new Public Contracts Code concern technical incentives for employees involved in design activities.
A list of eligible activities is set out in a specific annex.
These technical incentives benefit the contracting authority’s staff who carry out the activity. By law, they are set at 2% of the tender base amount.
Of this amount, 80% is allocated to staff and the remaining 20% is required for purchasing goods for them.
The incentives may not exceed, over the year, the employee’s total gross annual remuneration. Under the old code, this limit was 50% of remuneration.
The new code also increases the maximum ceiling, and therefore the remuneration, where the contracting authority uses digital tools to manage contracts.
BOOK TWO: contracts and procedures
Book Two of the new Public Contracts Code covers a broad range of topics, from Article 48 to Article 140, and is divided into 7 parts:
- Part One: devoted to contracts below the European thresholds;
- Part Two: contains provisions common to all contracts;
- Part Three: concerns contracting authorities on one side and economic operators on the other;
- Part Four: concerns procedures for selecting the contractor;
- Part Five: governs how procedures must be conducted, including initial documents, notices, invitations and tenders. It also covers economic operators’ requirements and the examination of tenders;
- Part Six: governs contract execution;
- Part Seven: concerns specific contracts.
Analysis of the 7 parts making up Book Two of the new Public Contracts Code
Part One of Book Two:
As mentioned above, this specifically concerns all works, services and supplies contracts below the European thresholds.
Part Two of Book Two:
It concerns common institutions and clauses and contains Articles 56 to 61. Article 56 lists types of contracts excluded from the code, such as employment contracts and the purchase and lease of property. Other relevant articles introduce changes in the new Public Contracts Code compared with its predecessor, such as Article 58, concerning the division of contracts into lots. As already mentioned, artificial aggregation of lots into a single contract is prohibited; contracts should instead be divided into several functional lots, especially to facilitate participation by small and medium-sized enterprises (SMEs).
Further topics covered in Part Two of Book Two include framework agreements, which must have a maximum duration of four years, except in exceptional cases, and are concluded with one or more economic operators. The same part also regulates price revision. Article 60 states that appropriate price-revision clauses must be included in the initial tender documents.
Part Three of Book Two:
It concerns the parties required to apply the new Public Contracts Code, specifically contracting authorities on one side and economic operators on the other.
The former are generally the parties that pay economic operators to obtain works, services or supplies.
Contracting authorities may also join with others to manage procedures jointly or centrally, depending on the contract value.
Economic operators may instead join together to participate in contracts by forming consortia or temporary groupings. In the latter case, the economic operators, known as mandators, must choose one of their number, called the lead operator, to represent them before the contracting authority.
Part Four of Book Two:
This concerns the procedure for selecting the contractor, namely the economic operator, based on the tenders submitted. Each economic operator may submit only one tender. The procedure may be managed in the following ways: by open procedure, restricted procedure, competitive procedure with negotiation, competitive dialogue, innovation partnership or negotiated procedure without publication of a notice.
Part Five of Book Two:
This governs the conduct of the tender. First, preparatory steps may be taken before the tender itself, such as market consultations, prior-information notices and preparation of the tender documents. Tender notices, notices and invitations are then prepared. In this part, the new Public Contracts Code specifies all the characteristics and applicable time limits for these documents. In particular, Article 108 regulates the award criteria, which are:
-the most economically advantageous tender criterion
-the lowest-cost criterion
In the first case, the tender offering the best quality-price ratio will be selected: it consists of a technical tender and a financial tender, with the latter submitted at a reduction. The best tender is the one receiving the highest overall score, calculated by adding the scores awarded for the technical and financial tenders. The aim is therefore to reward tenders not only economically but also from a technical and qualitative perspective. Under the second criterion, the tender offering the largest reduction on the amounts put out to tender is selected.
Part Six of Book Two:
This regulates the stages of contract execution, namely the stage in which the economic operator that has already been awarded the contract begins the activities enabling the contracting authority to obtain the works, services or supplies covered by the contract.
Works must undergo testing. Services and supplies, on the other hand, must undergo conformity verification. Final testing or conformity verification, as stated in Article 116 of the new Public Contracts Code, must be completed no later than six months after the works or services are completed, except in particularly complex cases, where the period may be extended to one year. A test certificate must then be issued; it will be provisional and become final after two years. The tester may not be the person responsible for the tender, design, works management or execution.
A change compared with the old code is the possibility of cascading subcontracting, provided for in particular by Article 119 of Legislative Decree 36/2023. This occurs when the performance of subcontracted activities is itself subcontracted. It is important to note that the contracting authority must specify which activities may not be further subcontracted and therefore may not be subject to cascading subcontracting.
Part Seven of Book Two:
This is devoted to rules for certain types of contracts in the ordinary sector, particularly contracts for social and related services, such as personal services, catering and canteens, reserved contracts, contracts in the cultural heritage sector, and contracts governing participation requirements for partnerships, research and development, security and segregated contracts.
BOOK THREE: contracts in special sectors
Book Three of the Public Contracts Code is devoted to contracts in special sectors, such as gas, electricity, water and transport. It is divided into three parts covering general provisions, procedures for selecting the contractor, such as restricted or negotiated procedures with or without a notice, and methods for selecting tenders.
BOOK FOUR: public-private partnerships and concessions
Book Four of the new Public Contracts Code is divided into six parts and is devoted to public-private partnerships and concessions. It outlines the role of granting bodies and economic operators in pursuing a shared public interest.
More specifically, a public-private partnership is an economic transaction establishing a contractual relationship between a granting body and one or more private economic operators to pursue a public interest, which must always also be pursued in accordance with the principle of the result mentioned above.
A works or services concession, on the other hand, means carrying out a project through works or providing a service, including managing the project or service itself, by the economic operator, which thereby assumes the operational risk connected with its management.
BOOK FIVE: litigation and oversight
Lastly, Book Five of the new Public Contracts Code is divided into three parts:
Part One of Book Five
Part One of Book Five contains rules on disputes that may arise in connection with public contracts, providing for possible court proceedings and a range of alternative remedies, such as amicable agreements, settlements and arbitration.
Part Two of Book Five
Part Two of Book Five concerns the management and oversight system for public contracts through ANAC (National Anti-Corruption Authority). It also provides for a control room for managing contracts at national level, with this management entrusted partly to the Ministry of Infrastructure.
Part Three of Book Five
Part Three, the final part of Book Five, contains transitional, coordinating and repealing provisions.
Annexes to the New Public Contracts Code 2023
At the end of the new Public Contracts Code is the section devoted to the annexes, divided among each of the 5 books into which the code is organised.
The topics covered in the annexes include, in particular, RUP activities, the planning of works and services using model templates, design verification, criteria for preparing regional price lists, the qualification of contracting authorities and central purchasing bodies, works management and execution activities, testing and conformity verification.
With its detailed and updated approach, this new code aims to improve efficiency and transparency in public contracts, promoting a fair and competitive environment. Proper understanding and application are essential for all parties involved in these processes.
The New Public Contracts Code 2023 for efficiency and transparency
In conclusion, the new Public Contracts Code 2023 represents a significant advance compared with the previous legislation, introducing targeted innovations to strengthen efficiency and transparency in public procurement processes in Italy.
One of the main changes is the mandatory use of digital platforms for managing public contracts throughout their lifecycle, aimed at simplifying procedures and improving accessibility for potential tenderers. The code also encourages collaboration and innovation in the proposed solutions. The new contract award criteria go beyond price alone, including an assessment of the quality, innovation, sustainability and social impact of tenders. This will promote the selection of suppliers that provide added value, while encouraging more sustainable and innovative solutions.
In summary, the new Public Contracts Code 2023 represents a decisive step towards modernising the sector, promoting transparency, efficiency and collaboration in a context of growing digitalisation.
The complete text of the new Public Contracts Code 2023 is provided below → https://www.codiceappalti.it/
DISCOVER MELA, the digital construction site management app
It is often difficult to understand how to embrace and put into practice the digital transition affecting the construction sector.
You can start here with our app dedicated to the digital management of construction sites.
How can Mela help you?
You can create your site diary, share the site with field and office staff, track hours and materials with work reports, and export your site diary, all while speeding up processes and reducing costs.
How?
Find out by clicking here!